Microphones
Electret Microphones
Pambry Electronics Ltd
Pambry Electronics Ltd
Pambry Electronics Ltd
Pambry Electronics Ltd
Pambry Electronics Ltd
Pambry Electronics Ltd
Tel 01202 624910
Email sales@pambry.co.uk
Where Sounds Make Sense

Microphones

Almost 50 years experience in the development and manufacture of microphones.





















Mechanical designs

various cables   As well as offering a stocked range of 20+ different designs, Pambry has a
      strong track record of developing custom made bespoke designs.
      Click here for further information.
various cables   Pambry's own range of microphones also include a partnership with Astrocom
      Electronics. This joint venture has created several microphones that meet military
      standard waterproof microphone specifications. These include the DC M-7A,
      M162, M170, and the M174. All of which are QPL listed. See Microphone list below
      to view which models are equivalent.
various cables   The Mask Air Noise Suppression System (MANS) is able to remove breathing
       noise in masks typically used in aviation emergency or fire fighting breathing
      equipment. See video to the left for a preview.
various cables   All microphones are to Mil standard, and individually tested before dispatch.
various cables   Pambry can also custom design to your specifications, please click here to
      contact us.
various cables   Many of the Pambry Microphones use the QPL shell but others incorporate a
      wireframe boom, or are designed for masks. We also develop cockpit microphones.
various cables   We also use CAD and 3D printing as a method to prototype our mechanical
      designs when building a bespoke solution. See here for details.
Listen to a demo of
our breathing noise suppression system
PED0550 Noise Cancelling Electret Microphone
dBV VS frequency near and far sensitivity, Normalised to 0dBV
Polar response at 1kHz/1m
Sensitivity: -22dBV/Pa ± 3 typical into 5V/5kΩ
>25dB noise cancelling at 100Hz
IP67
Wire ended terminals
Standard layout QPL durable flexi boom arm
PED0551 Noise Cancelling Electret Microphone
dBV VS frequency near and far sensitivity, Normalised to 0dBV
Polar response at 1kHz/1m
Sensitivity: -33dBV/Pa ± 3 typical into 5V/5kΩ
>25dB noise cancelling at 100Hz
IP67
Wire ended terminals
Standard layout QPL durable flexi boom arm
PED0552 Noise Cancelling Electret Microphone
dBV VS frequency near and far sensitivity, Normalised to 0dBV
Polar response at 1kHz/1m
Sensitivity: -37dBV/Pa ± 4 typical into 5V/5kΩ
>25dB noise cancelling at 100Hz
IP67
Wire ended terminals
Standard layout QPL durable flexi boom arm
PED0403 Low cost (non waterproof) Electret Microphone
dBV VS frequency near and far sensitivity, Normalised to 0dBV
Polar response at 1kHz/1m
Sensitivity: -33dBV/Pa ± 4 typical into 5V/5kΩ
>20dB noise cancelling at 100Hz
IP30
Wire ended terminals
Small microphone head with durable flexi boom arm
PED1037 Noise Cancelling Dynamic Microphone
dBV VS frequency near and far sensitivity, Normalised to 0dBV
Polar response at 1kHz/1m
Sensitivity: -65dBV/Pa 1 5 typical into 150Ω
>25dB noise cancelling at 100Hz
IP67
Wire ended terminals
Tested to MIL-PRF-26542E (M138/G)
Standard layout QPL durable flexi boom arm
PED0608 Noise Cancelling Dynamic Microphone
dBV VS frequency near and far sensitivity, Normalised to 0dBV
Polar response at 1kHz/1m
Sensitivity: -82dBV/Pa ± 5 typical into 5Ω
>25dB noise cancelling at 100Hz
IP67
Wire ended terminals
Designed to MIL-PRF-26542E (M138/G)
Standard layout QPL durable flexi boom arm
PED0781 Noise Cancelling Dynamic Microphone
dBV VS frequency near and far sensitivity, Normalised to 0dBV
Polar response at 1kHz/1m
Sensitivity: -82dBV/Pa ± 5 typical into 5Ω
>25dB noise cancelling at 100Hz
IP67
Specialised connector range
Design combination of flexi boom
arm, pivot and cable lead to
2 pin connector
PED0611 Noise Cancelling Amplified Electret Microphone
dBV VS frequency near and far sensitivity, Normalised to 0dBV
Polar response at 1kHz/1m
Sensitivity: -82dBV/Pa ± 3 typical into 15Ω
>25dB noise cancelling at 100Hz
IP67
Wire ended terminals
Equivalent to DC M-7A
Standard layout QPL durable flexi boom arm
PED0630 Noise Cancelling Amplified Electret Microphone
dBV VS frequency near and far sensitivity, Normalised to 0dBV
Polar response at 1kHz/1m
Sensitivity: -28dBV/Pa ± 3 typical into 470Ω
>25dB noise Cancelling at 100Hz
IP67
U-173 plug connector
Equivalent to DC M-7A
Long Flexi boom arm with ridged wireframe support to 2 pin connector
PED0588 Noise Cancelling Amplified Electret Microphone
dBV VS frequency near and far sensitivity, Normalised to 0dBV
Polar response at 1kHz/1m
Sensitivity:-28dBV/Pa ± 3 typical into 150Ω
>25dB noise cancelling at 100Hz
IP67
Wire ended terminals
Equivalent to DC M-7A
Half flexi boom arm, half ridges wire boom
to flying lead
PED0631 Noise Cancelling Amplified Electret Microphone
dBV VS frequency near and far sensitivity, Normalised to 0dBV
Polar response at 1kHz/1m
Sensitivity: -46dBV/Pa ± 3 typical into 150Ω
>25dB noise cancelling at 100Hz
IP67
Wire ended terminals
Equivalent to M162 Output
Standard layout QPL durable flexi boom arm
PED0646 Noise Cancelling Amplified Electret Microphone
dBV VS frequency near and far sensitivity, Normalised to 0dBV
Polar response at 1kHz/1m
Sensitivity: -59.6dBV/Pa ± 3 typical into 150Ω
>25dB noise cancelling at 100Hz
IP67
Wire ended terminals
Equivalent to M170 Output
Standard layout QPL durable flexi boom arm
PED0632 Noise Cancelling Amplified Electret Microphone
dBV VS frequency near and far sensitivity, Normalised to 0dBV
Polar response at 1kHz/1m
Sensitivity: -28dBV/Pa ± 3 typical into 150Ω
>25dB noise cancelling at 100Hz
IP67
U-173 socket connector
Equivalent to DC M-7A
Adjustable ridged wireframe boom arm
PED0193 Noise Cancelling Amplified Electret Microphone
dBV VS frequency near and far sensitivity, Normalised to 0dBV
Polar response at 1kHz/1m
Sensitivity: -46dBV/Pa ± 3 typical into 150Ω AC
>25dB noise cancelling at 100Hz
Mil-Std-810; 507, 509, 508.6, 510.5
Screw terminals
Equivalent to M162 output
Standard Pambry screened
enclosure to screw terminals
Optional wireframe boom
PED0207 Noise Cancelling Amplified Electret Microphone
dBV VS frequency near and far sensitivity, Normalised to 0dBV
Polar response at 1kHz/1m
Sensitivity: -46dBV/Pa ± 3 typical into 150Ω AC
>25dB noise cancelling at 100Hz
Mil-Std-810; 507, 509, 508.6, 510.5
Wire ended terminals
Equivalent to M174 output
Standard Pambry screened enclosure
with moulded cable terminal
Optional wireframe boom
PED0129 Noise Cancelling Amplified Electret Microphone
dBV VS frequency near and far sensitivity, Normalised to 0dBV
Polar response at 1kHz/1m
Sensitivity: -59.6dBV/Pa ± 3 typical into 150Ω
>20dB noise cancelling at 100Hz
Mil-Std-810; 507, 509, 508.6, 510.5
Screw terminals
Equivalent to M170 output
Standard Pambry screened
enclosure to screw terminals
Optional wireframe boom
PED0641 Amplified Electret Microphone for Masks
dBV VS frequency near and far sensitivity, Normalised to 0dBV
Sensitivity: -28dBV/Pa ± 3 typical into 150Ω
IP65
Wire ended terminals
Equivalent to DC M-7A
8mm through hole mask microphone fitting
SK10577 Breathing Noise Suppression Mask Microphone
dBV VS frequency near and far sensitivity, Normalised to 0dBV
Sensitivity: -30dBV/Pa typical into 150Ω;
Available for breathing apparatus such as, firefighting, respirators, under sea masks
Can be optimised mechanically and electrically to your specification
PED0570 Sub Miniature Covert Electret Microphone
dBV VS frequency near and far sensitivity, Normalised to 0dBV
Sensitivity: -80dBV/Pa ± 3 typical into 300Ω;
IP54
OMJ-101 connector
Miniature microphone housing to cable terminal
PED0864 Miniature Dynamic Microphone
dBV VS frequency near and far sensitivity, Normalised to 0dBV
Sensitivity: -5dBV/Pa to -40dBV/Pa
Mil-Std-202; 107, 201| Mil-Std-810; 507, 514.4, 510.5
Wire ended terminals
ø3mm x 10mm microphone onto 4mm cable
SK10575 Marine Bridge Microphone
dBV VS frequency near and far sensitivity, Normalised to 0dBV
Sensitivity: -5dBV/Pa 1 3 typical into 15kΩ
IP67
Conforms to the new July 2014 regulations of the International Marine Organization IMO-MSC-333-90 standard
RCA output connector
12V input omni microphone
Internal self test function
Electrical characteristics can be optimised for any
voice data recorder
Not seeing what you're looking for?
We can custom make microphones, cables
and cable assemblies to your specifications.

Click here to contact us.
Download Pambry
microphones data
specification brochure
Listen to a demo of
our breathing noise suppression system
Pambry Electronics Limited
Pambry House, Units 7 & 8 Ventura Centre, Ventura Place, Upton Industrial Estate, Upton, Poole, Dorset BH16 5SW
Terms & conditions. Privacy policy.
© Pambry Electronics Ltd 2015.
Unauthorised use or copying is not permitted.

web design Blueseahorse Design